Driveways and patios play a significant role in the outside design of your property. After being exposed to corrosive substances for a while, high pressure cleaning is crucial.
Although routine scraping and blowing maintenance might extend the interval between pressure cleaning sessions, they are unavoidably necessary to restore your property’s pristine appearance. Although driveways and pavers are thought to require little upkeep, with time they will succumb to moss, mud, tire skid marks, and even efflorescence.
What Equipment is needed?
Equipment is needed to pressure clean patio pavers and roads. The bare minimum is a pressure pump, some nozzles, and detergent. Therefore, it is preferable to engage specialists like Power Clean Pros to carry out the pressure cleaning work flawlessly. The surface of your bricks might be permanently ruined by improper spray pressure. However, if you know what to do, it is a good pastime. Start spraying after consulting the following list for that.
How to start?
Remove any potted plants, chairs, and other items from your patio or driveway. Any dirt or debris that is left underneath them will stay and cause the patio to degrade even more. Remove any clay lumps, leaves, or other hardened deposits by using a leaf blower and scraper.
After appropriately assembling your pressure washer—that is, by attaching the transmission pipe to the nozzle and calibrating the pump’s pressure—use the cleaning agent that is recommended for cleaning patios. If necessary, you might seek the advice of a house cleaning specialist. When working with pressurized systems, safety eyewear should always be used.
How to clean it entirely?
Bricks and patios soak up water. Therefore, it’s crucial to fully soak them in water before using any cleaning. Use a low pressure setting and step back a bit to further lower the application’s effective pressure. If the brick isn’t wet, the cleaning agent or detergent will be absorbed and cause damage.
Next, apply the detergent or cleaning agent in clearly defined areas and give it 5 to 10 minutes to work. Keep an eye out for areas that are drying out. In some situations, reapplication is necessary. Using a low pressure spray and more detergent is the best method for pressure cleaning a patio.
Switch to a low pressure sensitive nozzle and flush any leftover detergent from the system once the detergent has finished its job. At each row of bricks, cover two or three rows at a time, and then gradually wipe the cleaning solvent from the surface. Deeply discolored areas could need more passes.
If any white efflorescence is present after the brick has cured, you might need to manually scrape it off. Scrub by hand with an efflorescence removal solution. Observe the instructions from the manufacturer. Never apply the efflorescence removing solution with a pressure washer. Adding extra water to the surface might occasionally do more damage than good.
Simply follow it with a water spray rinse. We’re done now! In addition to extending the lifespan of your pavers, high pressure washing properly may keep your property looking upscale and instantly increase its worth.
If you live in Reno, Sparks, or the neighboring areas of Nevada and need a pressure wash cleaning, please visit Power Clean Pros for further details.